ebdbr.com OmniAccess Stellar AP1201 wireless access point | eBD

Product specifications Radio specification • AP type: Indoor, dual radio, 5 GHz 802.11ac 2x2:2 MU-MIMO and 2.4 GHz 802.11n 2x2:2 MIMO • 5 GHz: Two spatial stream single user (SU) /multi user (MU) MIMO for up to 867 Mb/s wireless data rate • 2.4 GHz: Two spatial stream single user (SU) MIMO for up to 400 Mb/s wireless data rate to individual 2x2 VHT40 client devices (300 Mb/s for HT40 802.11n client devices) • Supported frequency bands (countryspecific restrictions apply): ¬ 2.400 to 2.4835 GHz ¬ 5.150 to 5.250 GHz ¬ 5.250 to 5.350 GHz ¬ 5.470 to 5.725 GHz ¬ 5.725 to 5.850 GHz • Frequencies fixed at factory for Middle East models OAW-AP1201-ME 2400 - 2483.5 MHz 5150 - 5350 MHz • Available channels: Dependent on configured regulatory domain • DFA (dynamic frequency adjustment) optimizes available channels and provides proper transmission power • Short guard interval for 20 MHz, 40 MHz, 80 MHz channels • Transmit beam forming (TxBF) for increased signal reliability and range • 802.11n/ac packet aggregation: Aggregated Mac Protocol Data Unit (A-MPDU), Aggregated Mac Service Data Unit (A-MSDU) • Supported data rates (Mb/s): ¬ 802.11b: 1, 2, 5.5, 11 ¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 ¬ 802.11n: 6.5 to 300 (MCS0 to MCS31) ¬ 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80) • Supported modulation types: ¬ 802.11b: BPSK, QPSK, CCK ¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80 • Maximum (aggregate, conducted) transmit power (limited by local regulatory settings): ¬ 2.4GHz: +21dBm (18 dBm per chain) ¬ 5GHz: +23dBm (20 dBm per chain) • Advanced Cellular Coexistence (ACC) Minimizes interference from 3G/4G cellular networks, distributed antenna systems, and commercial small cell/ femtocell equipment Interfaces • 1× 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE) • 1x Bluetooth Low Energy (BLE) 5.0 radio, integrated antenna. Hardware ready for Zigbee. • 1× management console port (RJ-45) • Reset button: Factory reset • Kensington security slot Visual Indicators (Tri-color LEDs) • For system and radio status ¬ Red flashing: System abnormal, link down ¬ Red light: System startup ¬ Red and blue rotate flashing: System running, OS upgrading ¬ Blue light: System running, dual bands working ¬ Green flashing: System running, no SSID created ¬ Green light: System running, single band working ¬ Red, blue and green rotate flashing: System running, use for location of an AP Antenna • AP1201: Built-in 2×2:2 @ 2.4 GHz, 2x2:2 @ 5 GHz, BLE antenna ¬ Integrated dual-band down tilt omni- directional antennas for 2x2 MIMO with maximum antenna gain of 4.7 dBi in 2.4 GHz and 4.6 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. ¬ Integrated BLE antenna with peak gain 3.7dBi Receive sensitivity (per chain) 2.4 GHz 5 GHz 1 Mb/s -98 11 Mb/s -89 6 Mb/s -92 -91 54 Mb/s -75 -74 HT20 (MCS 0/8) -91 -90 HT20 (MCS 7/15) -72 -71 HT40 (MCS 0/8) -89 -88 HT40 (MCS 7/15) -70 -69 VHT20 (MCS 0) -91 -90 VHT20 (MCS 8) -68 -67 VHT40 (MCS 0) -89 -88 VHT40 (MCS 9) -64 -63 VHT80 (MCS0) -84 VHT80 (MCS9) -59 Maximum transmit power (per chain) 2.4 GHz 5 GHz 1 Mb/s 18 dBm 11 Mb/s 18 dBm

 

Preço sem imposto e sem frete 

OmniAccess Stellar AP1201 wireless access point

R$ 1.340,00Preço